Remote Series
PRINT E-MAIL BOOKMARK  

Lighthouse Remote series laser particle counters have been created for continuous 24 hours, 7 days a week operation. These counters integrate seamlessly with large facility monitoring/management systems and transfer up to 4 channels of simultaneous particle count data using analog or digital output.

A range of models are available to meet specific requirements. Models differ based on flow rate, sensitivity, communication mode and vacuum pump. Complete custom installation, depending on your site requirements, can be carried out by our engineers, including probe placement and design, NEMA4 panel installation, cabling installation and system qualification.

Multiple software options are available depending on the type of alarm capability that is required.


  ENQUIRY
MODELS

Product description Code
5102 particle counter, 1CFM flow rate, sensitivity: 0.5 microns, external vacuum source L4030002072
5012 particle counter, 0.1CFM flow rate, sensitivity: 0.5 microns, external vacuum source L4030002061
3102 particle counter, 1CFM flow rate, sensitivity: 0.3 microns, external vacuum source L4030002261
3012 particle counter, 0.1CFM flow rate, sensitivity: 0.3 microns, external vacuum source L4030002051
2012 particle counter, 0.1CFM flow rate, sensitivity: 0.2 microns, external vacuum source L4030002041
5012PN particle counter, 0.1CFM flow rate, sensitivity: 0.5 microns, internal vacuum source, SS enclosure L4030002393
5012PN particle counter, 0.1CFM flow rate, sensitivity: 0.5 microns, internal vacuum source, PCS enclosure L4030002394
3012PN particle counter, 0.1CFM flow rate, sensitivity: 0.3 microns, internal vacuum source, SS enclosure L4030002383
3012PN particle counter, 0.1CFM flow rate, sensitivity: 0.3 microns, internal vacuum source, PCS enclosure L4030002384
5102PN particle counter, 1CFM flow rate, sensitivity: 0.5 microns, internal vacuum source, SS enclosure L4030002373
5102PN particle counter, 1CFM flow rate, sensitivity: 0.5 microns, internal vacuum source, PCS enclosure L4030002374

 


MORE INFORMATION

FEATURES

Product details for Remote Series Particle Counters
bullet 0.2 – 25 micron sensitivity
Productseperator
bullet Integrate seamlessly into large facility monitoring and management
  systems and transfer up to 4 channels of simultaneous particle counts
Productseperator
bullet Status indicators for power & service
Productseperator
bullet Options of an internal or external vacuum source
Productseperator
bullet Optional temperature & humidity sensor can be provided
Productseperator
bullet Versatile mounting options

SPECIFICATIONS

Product specifications for Remote Series Particle Counters
Sizes range 5xxx series: 0.5 to 25.0 microns
3xxx series: 0.5 to 25.0 microns
2xxx series: 0.5 to 2.0 microns
Counting efficiency 5xxx series: 50% @ 0.5 microns
3xxx series: 50% @ 0.3 microns
2xxx series: 50% @ 0.2 microns
Flow rate x102 series: 1CFM (28.3LPM)
x012 series: 0.1CFM (2.83LPM)
Laser source Laser diode
Zero count level < 1 count in 5 minutes (per JIS)
Concentration limits
(@ 5% coincidence loss)
x102 series: 500,000 particles/cu. ft.
x012 series: 2,000,000 particles/cu. ft.
Communication mode 4-20mA
LED indicators Power, service
Connector Screw terminals
External alarm output Normally open (N); dry contact (rated 0-60VDC/VAC, 1Amp)
Power 24VDC
Operating environmental conditions 10 to 40°C / 20 to 95%RH non-condensing
Storage environmental conditions -10 to 50°C / < 98%RH non-condensing

DOWNLOADS

Documentation for Remote Series Particle Counters
Data Sheet Remote counters list
Data Sheet 1 CFM particle counters
Data Sheet 0.1 CFM particle counters
Data Sheet 5102PN particle counters
Data Sheet 5012PN particle counters

ACCESSORIES

Recommended accessories for Remote Series Particle Counters
Product description Code
Remote mounting bracket (not for PN models) L2113152171
Isokinetic sampling probe 1.0 CFM direct mount (stainless steel) L2113152032
Isokinetic sampling probe 1.0 CFM barbed (stainless steel) L2113153602
Isokinetic sampling probe 0.1 CFM direct mount (stainless steel) L2113152012
Isokinetic sampling probe 0.1 CFM barbed (stainless steel) L2113152002
Data cable - CAT5 4-pair plenum L4030277761
Vacuum tubing per foot - 3/8"OD 1/4"ID L079206425
Sample tubing per foot - 1/4"OD 1/8"ID L079206429
LMS Express Real Time software - USB key L4030275031
LMS Express Real Time Plus software - USB key L4030275041
© 2008 Easy Solutions, All rights reserved.